Paslode is introducing the world's first Fuel Powered Cordless Roofing Nailer System, Model CR15C. The This tool drives two nails per second and holds 120 nails per coil. The CR15C has a single door magazine for easy loading, skid guards and a belt hook and can drive 2,200 nails per battery charge and 950 nails per fuel cell.
Fuel Powered Cordless Roofing Nailer System
From Paslode
-
Fuel Powered Cordless Roofing Nailer System
Product From Paslode
-
-
Expand for more details on this Product
-
16-Gauge Angled Li-ion Cordless Finish Nailing System
Product From Paslode -
Paslode’s 16-Gauge Angled Li-ion Cordless Finish Nailing System, at just 4.5 pounds, reaches tough corners and tight spaces while minimizing fatigue. This lightweight system also eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge. Each Fuel+Nail Combo Pack includes 1,000 nails and a quicklode fuel cartridge that delivers enough fuel to drive them.
-
16-Gauge Angled Li-ion Cordless Finish Nailing System
Product From Paslode -
Paslode’s 16-Gauge Angled Li-ion Cordless Finish Nailing System utilizes the company’s Fuel+Nail Combo Pack, which includes 1,000 nails and a “quicklodefuel” cartridge that delivers enough fuel to drive them. At 4.5 pounds, the compact nailer reaches tough corners and tight spaces and eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge and can reach 80 percent charge in 30 minutes.
- Product From Hitachi Power Tools
-
Hitachi's NT50AF 2-in. T & L flooring nailer accepts both T and L shaped 16-gauge cleats (nails) from 1-3/16 in. up to 2 in. in length for installing 1/2in. or 3/4in. domestic solid wood flooring. The NT50AF features a "preferred seating system," which guarantees accurate placement of each cleat at the proper angle and depth to produce straight boards and secure tongue and groove flooring.
- Product From Senco Brands, Inc.
-
15GA. 2-1/2" Finish nailer with Neverlube design. Magnesium mainbody, lightweight, EZ-Clear latch. 5 year warranty.
- Product From Paslode
-
Paslode’s PowerFramer 350 is engineered to deliver more than 18 months of service before requiring maintenance. Weighing 7.5 pounds the unit is able to consistently drive a three-inch fastener into engineered lumber. Tool-less depth-of-drive adjustment and a dual mode (single or rapid cycles) trigger are standard. Nail capacity is two full strips, or 84 paper-collated fasteners.
- Product From DEWALT
-
DeWalt recently launched two nailers: a heavy-duty round head framing nailer (D51850) and heavy-duty clipped head framing nailer (D51825). The tools are designed to fire an average of eight nails per second, offer users 20 percent less air consumption and are engineered to have longer life in key wearable components such as driver blade assembly and bumper, the manufacturer says.
-
Specialty Brad Nailer and Finish Stapler
Product From DEWALT -
The D51236K brad nailer will hold 110 brad nails ranging from 5/8" to 1-1/4". It can be used on both hard and soft woods. For increased jobsite performance, the brad nailer and narrow crown finish staplers are each equipped with a tool-free depth adjustment that allows the user to quickly set the depth for proper nail countersink. In addition, each tool was designed with a low profile no-mar pad and a swept back contact trip to provide end users with a clean line of sight for easy and accurate fastener placement.
- Product From Paslode
-
Paslode's new 16-Gauge Angled Li-ion Cordless Finish Nailer weighs just 4.5 lbs., and reaches tough corners and tight spaces while minimizing fatigue. The lightweight system also eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge. The nailer can be teamed with the Fuel+Nail Combo Pack, which includes 1,000 nails and a quicklode fuel cartridge.
- Product From Robert Bosch Tool Corp.
-
The Skil Mag77lt weighs in at 4-lbs. lighter than the standard worm drive saw, which makes it the lightest option available. The saw is equipped with the cut ready depth of cut system for easy and efficient depth of cut adjustments and a 24-tooth carbide blade for impact resistance. The foot of the saw stores a multi-function wrench, which can be used for the oil plug, brush cap, adjusting DOC and Bevel nuts and removing the blade diamond knock-outs.
- Product From IDEAL INDUSTRIES, INC.
-
The electrician’s jab saw from Ideal Industries Inc. features a quick change fastening system that accepts all reciprocating and hacksaw blades. A Santoprene grip cushions the user’s hand from vibration stress and the contoured head provides the thumb and index finger with slip-resistant protection. The head’s forward weigh design concentrates energy on the cutting zone. The bi-metal construction plunged tip cuts through thick drywall and cement board.