Crown+MiterPro for SawGear

Crown+MiterPro for SawGear Product From TigerStop: TigerStop has made available its Crown+MiterPro for SawGear, which is an automated length-measuring system that attaches to miter and radial arm saws. Crown+MiterPro, which now is included in every new SawGear, calculates difficult crown angles and lengths instantly. It provides the right angle and side to set a miter saw, along with the correct length for the part, ensuring the perfect part is cut every time.; Expand for more details on this Product

Compact Portable Table Saw Product From Ridgid: The RIDGID 10-in. compact portable table saw features a 15-amp motor, 6-in. solid wheels and a retractable handle allow for jobsite portability. The tool has an integrated riving knife/spreader that converts in seconds from spreader to riving knife for non-through cuts. On-board storage holds miter gauge, push stick and power cord, and the dual-locking rip fence clamps on both front and rear of table.

Ten-inch Miter Saw Product From Ryobi Technologies, Inc.: Ryobi’s 10-in. miter saw features a twist handle with multiple settings for user comfort, especially when bevel cutting. An adjustable laser alignment system allows users to position the laser to their preferred cutting style. Other features include a crown molding stop, a table support on extension for cutting larger materials, and an extra-large dust port and dust bag.

7- 1/4-in. Metal Cutting Saw, Model 4131 Product From Makita USA, Inc.: Makita USA announces the release of a new 7-1/4-in. metal cutting saw, model 4131. The 4131 guarantees faster, cleaner and more efficient metal cutting with exceptional versatility making it an ideal choice for plumbers, electricians, HVAC, steel framers, metal fabricators and many other trade professionals. This new metal cutting saw touts a powerful 13 AMP motor to cut through a variety of metal including sheet metal, steel studs, pipes, and rebar.

Adjustable Miter Saw Laser System Product From DEWALT: DeWalt's DW7187, adjustable miter saw laser system, was designed exclusively for use on the newly launched line of 12-in compound miter saws and 12-in. sliding compound mitersaw, available in three models. The product was designed as an integral part of the saw that mounts on the upper arm, allowing the laser line to be visible on the top and face of materials. The laser is not obstructed by taller materials placed against the fence and is visible throughout the entire cut.

Cordless Finish Nailer Product From Paslode: Paslode's new 16-Gauge Angled Li-ion Cordless Finish Nailer weighs just 4.5 lbs., and reaches tough corners and tight spaces while minimizing fatigue. The lightweight system also eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge. The nailer can be teamed with the Fuel+Nail Combo Pack, which includes 1,000 nails and a quicklode fuel cartridge.

Mag77lt Product From Robert Bosch Tool Corp.: The Skil Mag77lt weighs in at 4-lbs. lighter than the standard worm drive saw, which makes it the lightest option available. The saw is equipped with the cut ready depth of cut system for easy and efficient depth of cut adjustments and a 24-tooth carbide blade for impact resistance. The foot of the saw stores a multi-function wrench, which can be used for the oil plug, brush cap, adjusting DOC and Bevel nuts and removing the blade diamond knock-outs.

Electrician's Jab Saw Product From IDEAL INDUSTRIES, INC.: The electrician’s jab saw from Ideal Industries Inc. features a quick change fastening system that accepts all reciprocating and hacksaw blades. A Santoprene grip cushions the user’s hand from vibration stress and the contoured head provides the thumb and index finger with slip-resistant protection. The head’s forward weigh design concentrates energy on the cutting zone. The bi-metal construction plunged tip cuts through thick drywall and cement board.

16-Gauge Angled Li-ion Cordless Finish Nailing System Product From Paslode: Paslode’s 16-Gauge Angled Li-ion Cordless Finish Nailing System, at just 4.5 pounds, reaches tough corners and tight spaces while minimizing fatigue. This lightweight system also eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge. Each Fuel+Nail Combo Pack includes 1,000 nails and a quicklode fuel cartridge that delivers enough fuel to drive them.

Compact Rotary Hammer Product From Hilti: The Hilti TE 2-A18 Compact Rotary Hammer is lighter in weight, while the TE 2-A18 Rotary offers more run time. Both models have high-efficiency motors and are suited for drilling anchor or through holes in concrete, brick and block with an optimum drilling diameter range of 3/16 to 3/8 in. CPC battery technology protects the battery, switch and motor for increased durability and longer battery life. The tools feature a drop-resistant housing.

Multimaster Start Q kit Product From Fein Power Tools: The Fein Multimaster Start Q kit includes everything needed for the most frequent renovation and interior construction jobs, such as sawing door jambs, expansion joints in laminate/parquet; sanding windows and doors; and scraping floor coverings, adhesive residue and more.