Fluke’s 414D, 419D and 424D Laser Distance Meters deliver point-and-click measurements up to 100 meters (330 feet). New features include: an integrated compass that provides a heading for distance measurement; an inclination sensor to assist with height tracking, leveling and indirect horizontal distance measurement when line of sight is blocked; and automatic endpiece correction. When measuring from an edge or corner, a built-in sensor detects the position of the bracket and automatically changes the reference point.
Laser Distance Meters
From Fluke Corp.
-
Product From Fluke Corp.
-
-
Expand for more details on this Product
- Product From Bullet Tools
-
The Magnum Shut-N-Cut from Bullet Tools is an insulation cutting system that decreases installation time threefold with one person cutting while three people are stuffing. It features an oversized clamp that firmly holds the insulation in place and compresses it by 80 percent while an easy, accurate cut is made with the specially designed EZ Insulation Knife that comes with it. The tool easily cuts insulation that's typically difficult to cut such as denim, Rockwool, foam and polyester while reducing jobsite dust.
- Product From Robert Bosch Tool Corp.
-
The Skil Mag77lt weighs in at 4-lbs. lighter than the standard worm drive saw, which makes it the lightest option available. The saw is equipped with the cut ready depth of cut system for easy and efficient depth of cut adjustments and a 24-tooth carbide blade for impact resistance. The foot of the saw stores a multi-function wrench, which can be used for the oil plug, brush cap, adjusting DOC and Bevel nuts and removing the blade diamond knock-outs.
- Product From IDEAL INDUSTRIES, INC.
-
The electrician’s jab saw from Ideal Industries Inc. features a quick change fastening system that accepts all reciprocating and hacksaw blades. A Santoprene grip cushions the user’s hand from vibration stress and the contoured head provides the thumb and index finger with slip-resistant protection. The head’s forward weigh design concentrates energy on the cutting zone. The bi-metal construction plunged tip cuts through thick drywall and cement board.
-
16-Gauge Angled Li-ion Cordless Finish Nailing System
Product From Paslode -
Paslode’s 16-Gauge Angled Li-ion Cordless Finish Nailing System, at just 4.5 pounds, reaches tough corners and tight spaces while minimizing fatigue. This lightweight system also eliminates compressor noise, hose management and clutter. Featuring a 7.4-volt battery and a one-hour rapid charger, the system drives up to 6,000 nails per charge. Each Fuel+Nail Combo Pack includes 1,000 nails and a quicklode fuel cartridge that delivers enough fuel to drive them.
-
20-Volt MAX lithium-ion system
Product From DEWALT -
DeWalt’s 20-Volt MAX lithium-ion system, includes a compact drill/driver, a premium drill/driver, two impact drivers, a compact hammer drill, a premium hammer drill , a reciprocating saw, a circular saw, an SDS rotary hammer, a right-angle drill (shown) and a work light . The system features compact and premium tools that offer 1.5 and 3.0 amp hour lithium-ion batteries which provide up to 35 percent more runtime versus other 18v lithium-ion tools.
- Product From Metabo
-
Metabo’s BS18 LTX Quick drill/driver has a dual-range torque adjustment with a maximum running torque of 372 in.-lbs. and up to 850 in.-lbs. for momentary spikes in the event of extreme resistance. The cordless drill/driver offers a no-load speed of 0-400 rpm in first gear and 0-1,400 rpm in second gear. When paired with the Power X3, the torque is tripled and the speed is reduced to 0-133 rpm for maximum control and power.
- Product From Fein Power Tools
-
The Fein Multimaster Start Q kit includes everything needed for the most frequent renovation and interior construction jobs, such as sawing door jambs, expansion joints in laminate/parquet; sanding windows and doors; and scraping floor coverings, adhesive residue and more.
- Product From Braxton-Bragg
-
Braxton-Bragg’s Dust Muzzle Ultra that can capture up to 99 percent of the unhealthy dust created during grinding. The DMU8 fits all 4-5 or 7-9 in. electric and pneumatic angle grinders. It has a side-mounted exhaust port that uses the centrifugal force created by the grinding wheel to send the dust into the vacuum hose. The design allows more dust to be removed from the workplace with less power. It can be used with a 2 hp industrial shop vacuum.
- Product From LaGesse Products LLC
-
LaGesse Products has introduced LaSquare, a combination square with a 2-in. wide base that can be used on odd shaped materials such as round or square tubing, handrails, pipe, crown molding, cement blocks, wooden posts and numerous other materials. It has a clearly visible built-In level, a stainless steel blade that is fully hardened and tempered and a satin-chrome finish with precisely etched graduation marks in 1/8, 1/16, 1/32 and 1/64 increments.
- Product From Kawasaki Motors Corp., U.S.A.
-
The Kawasaki 4010 Trans4x4 Diesel Mule utility vehicle features a tubular steel front brush guard that improves durability and helps protect the nose from debris and minor impacts, a multi-function digital fuel level and hour meter, a dash-mounted horn button that eliminates unintended beeps when turning, a thicker sport-style steering wheel and a 2-in. receiver hitch that allows towing of up to 1,200 lbs.